top of page
Wire for Robotic Arm

The wire for the robotic arm needs to have the characteristics of high flexibility and high elasticity. No matter which direction the arm joint is bent, it can respond to the 360-degree circling motion.

Maeden's mechanical arm wire is very suitable for various types of robots, because it is small and does not take up space, and the bending resistance is almost unbreakable.

High Bending & Circling Resistance

The flex life of the front electric wire is about 50 times better than that of the general wire. The ultra-thin tinsel on the wire and the overall structure design of the wire can reduce and disperse the bending force during bending, and reduce the accumulation of metal fatigue at a single point. At the same time, the fibers in the wire will also provide high tensile strength and strength dispersion. Therefore, compared with ordinary traditional wires, copper foil wires are less likely to break due to metal fatigue or insufficient tensile strength. 


Tinsel Wire Shielding Technology

Maedenuses the special characteristics of tinsel wire to develop an unbreakable copper foil wire shield to replace the copper wire shield. Its own structure will not affect the original softness of the wire, and the EMI performance is better than any traditional technology. The coverage can reach more than 90%, which can effectively protect against signal interference. Even when broken, the broken part of the copper foil will not puncture the inner wire insulation and cause a short circuit.



Maeden offers various strengths, denier numbers, grades' fibers with special performance requirements, The fibers provided by Maeden are not only simple fillings, but can greatly improve the reliability of the wire.​

bottom of page